מאוורר למעבד ZALMAN CNPS7500-CU LED

מאוורר למעבד מנחושת איכותי ושקט ביותר מבית ZALMAN תומך מעבדי INTEL ו-AMD.

אריזת RETAIL

אחריות ל-12 חודשים.

מאפיינים ושידרוגים:

פרטים נוספים:

מקט: ZALMAN-CNPS7500
מספר תשלומים: 2
זמן אספקה: עד5ימי עסקים
יצרן: ZALMAN

~~רגיל רגיל ₪290.00~~

מבצע ₪ 169.00 ILS 25/8/2027 In stock ZALMAN ZALMAN-CNPS7500 ZALMAN-CNPS7500

קנה עכשיו

תיאור מלא
מפרט טכני
חוות דעת


		Socket		CPU		CPU Compatibility

Intel	478	Celeron	Supports all speeds
		Celeron D
		Pentium 4
	775	Celeron D	Supports all speeds
		Pentium 4
		Pentium D
		Core 2 Duo
AMD	AM3	Phenom II	Supports all speeds
	AM2+	Sempron	Supports all speeds
		Athlon 64
		Athlon 64 X2
		Athlon 64 FX
		Phenom
		Phenom II
	AM2	Sempron	Supports all speeds
		Athlon 64
		Athlon 64 X2
		Athlon 64 FX
	754	Sempron	Supports all speeds
		Athlon 64
	939	Athlon 64	Supports all speeds
		Athlon 64 X2
		Athlon 64 FX
		Opteron
		Dual-Core Opteron
	940	Athlon 64 FX	Supports all speeds
		Opteron
		Dual-Core Opteron

	As shown in Figure 2, a motherboard that is not compliant with the "10.2mm motherboard component height restriction" standard, introduced by Intel, may create interference between components and the clip of CNPS7500 LED. Please do not install the CNPS7500 LED if this interference is observed.

	No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.

No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.

No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.

AMD sockets require Stock Retention Frame.

Dimensions	121(L) x 121(W) x 67(H) mm
Weight	848g
Base Material	Pure Copper
Dissipation Area	3,500㎠

Bearing Type	2 Ball-Bearing
Speed⁽¹⁾	1,150rpm ± 10% ~ 2,300rpm ± 10%
Noise Level⁽²⁾	17dBA ± 10% ~ 32dBA ± 10%

⁽¹⁾ The fan operates at 2,550rpm (34.5dBA) if directly connected to the motherboard’s power connector without the use of
FAN MATE2.

⁽²⁾ Measured 1m distance away from source.

Dimensions : 70(L) x 26(W) x 26(H) mm	Weight : 20g	Output Voltage : 5V ~ 11V ± 2%

Allowable Power : 6W or lower	Connector : 3-Pin

	Does not generate noise or vibration in Silent Mode.

	Pure copper base materials ensure excellent heat dissipation.

	Compatible with all single and dual core CPUs for Intel Socket 775/478 and AMD Sockets AM2/754/939/940.

	The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance.

	The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

Common Components

- Cooler (CNPS7500-Cu LED)
- Thermal Grease
- Fan Speed Controller (FAN MATE 2)
- Double-sided Tape (for FAN MATE 2 attachment)
- Cable for FAN MATE 2
- User’s Manual (in English and Korean)

Components for Intel Socket 775

- One (1) Clip Support for Socket 775
- One (1) Backplate for Socket 775
- Four (4) Clip Support Fixing Bolts
- One (1) Clip Lever

Components for Intel Socket 478

- One pair of Clip Supports for Socket 478
* Component Clip Lever

Component for AMD Socket AM2/754/939/940

* Component Clip Lever


		Socket		CPU		CPU Compatibility

Intel	478	Celeron	Supports all speeds
		Celeron D
		Pentium 4
	775	Celeron D	Supports all speeds
		Pentium 4
		Pentium D
		Core 2 Duo
AMD	AM3	Phenom II	Supports all speeds
	AM2+	Sempron	Supports all speeds
		Athlon 64
		Athlon 64 X2
		Athlon 64 FX
		Phenom
		Phenom II
	AM2	Sempron	Supports all speeds
		Athlon 64
		Athlon 64 X2
		Athlon 64 FX
	754	Sempron	Supports all speeds
		Athlon 64
	939	Athlon 64	Supports all speeds
		Athlon 64 X2
		Athlon 64 FX
		Opteron
		Dual-Core Opteron
	940	Athlon 64 FX	Supports all speeds
		Opteron
		Dual-Core Opteron

	As shown in Figure 2, a motherboard that is not compliant with the "10.2mm motherboard component height restriction" standard, introduced by Intel, may create interference between components and the clip of CNPS7500 LED. Please do not install the CNPS7500 LED if this interference is observed.

	No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.