ספק כח FSP 400-60HCN 400W , SATA X2, PCI-E 120mm FAN P.PFC

ספק כח איכותי במיוחד מבית FSP ,בעל הספק 400W אמיתי שקט ובעל מייצב מתח עם שלוש שנים אחריות!!.

מאפיינים ושידרוגים:

פרטים נוספים:

  • מקט: FSP400-400-60HCN
  • מספר תשלומים:  2
  • זמן אספקה: עד5ימי עסקים
  • יצרן:  FOXCONN
רגיל רגיל 420.00

מבצע   189.00 ILS 10/7/2027 In stock FOXCONN FSP400-400-60HCN FSP400-400-60HCN

  • +
  • -
visaisracardmastercarddinersamerican express paypal bit apple pay google pay

ATX400-PNR
    
Specifications
 
Input Specifications
• Voltage:
110-120/220-240VAC
• Frequency: 47 Hz to 63 Hz
• Input current: 8 amps maximum / 115Vrms, 60Hz.
4 amps maximum / 230Vrms, 50Hz.
 
Output Specifications
• Over-voltage protection: +3.3V (4.6V max.), +5V (6.5V max.),
12V1 (15.5V max.), 12V2 (15.5V max.)
• Over-current protection: +3.3V (75.0A max.), +5V (56.0A max.),
+12V1 (25.0A max.), +12V2 (30.0A max.)
• Short circuit protection: The power supply is prevented from output over current.
• Remote ON/OFF control: The power supply shall accept a logic open collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 115/230V (full load) 100 - 500 ms
 
General Specifications
• MTBF:
100K hours at 25°C
• Efficiency: 70% min.
• Hold-up time: 12.0ms minimum at 115V/60Hz.
16.0ms minimum at 230V/50Hz.
 
Environmental Specifications
• Operating conditions:
ambient temperature 0°C~50°C, 90% RH
• Storage and 
  shipping conditions:
ambient temperature -20°C~65°C, 95% RH
• Dielectric strength: primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second
Output
 
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.5A 22.0A ±5% 50mV P-P
+5V 0.3A 21.0A ±5% 50mV P-P
+12V1 1.0A 18.0A ±5% 120mV P-P
+12V2 1.0A 16.0A ±5% 120mV P-P
-12V 0.0A 0.3A ±10% 120mV P-P
+5Vsb 0.0A 2.0A ±5% 50mV P-P

ATX400-PNR
    
Specifications
 
Input Specifications
• Voltage:
110-120/220-240VAC
• Frequency: 47 Hz to 63 Hz
• Input current: 8 amps maximum / 115Vrms, 60Hz.
4 amps maximum / 230Vrms, 50Hz.
 
Output Specifications
• Over-voltage protection: +3.3V (4.6V max.), +5V (6.5V max.),
12V1 (15.5V max.), 12V2 (15.5V max.)
• Over-current protection: +3.3V (75.0A max.), +5V (56.0A max.),
+12V1 (25.0A max.), +12V2 (30.0A max.)
• Short circuit protection: The power supply is prevented from output over current.
• Remote ON/OFF control: The power supply shall accept a logic open collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 115/230V (full load) 100 - 500 ms
 
General Specifications
• MTBF:
100K hours at 25°C
• Efficiency: 70% min.
• Hold-up time: 12.0ms minimum at 115V/60Hz.
16.0ms minimum at 230V/50Hz.
 
Environmental Specifications
• Operating conditions:
ambient temperature 0°C~50°C, 90% RH
• Storage and 
  shipping conditions:
ambient temperature -20°C~65°C, 95% RH
• Dielectric strength: primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second
Output
 
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.5A 22.0A ±5% 50mV P-P
+5V 0.3A 21.0A ±5% 50mV P-P
+12V1 1.0A 18.0A ±5% 120mV P-P
+12V2 1.0A 16.0A ±5% 120mV P-P
-12V 0.0A 0.3A ±10% 120mV P-P
+5Vsb 0.0A 2.0A ±5% 50mV P-P

לקוחות שראו מוצר זה קנו גם...

לא מצאתם את מה שחיפשתם? השאירו פרטים ונחזור אליכם בהקדם!

דלג לתוכן מרכזי